Punching - Wire, Plastic Coil and Comb

Qupa M600 is a versatile manual punching machine for binding wire, plastic comb or coil. With easily exchangeable cartridges you can punch for plastic comb, coil (5:1 and 4:1) and 3:1 or 2:1 wire (with round or square holes).

Qupa D600 is a versatile electric punching machine for binding wire, plastic comb or coil. With easily exchangeable cartridges you can punch for plastic comb, coil (5:1 and 4:1) and 3:1 or 2:1 wire (with round or square holes).

Powerful punching machine for larger production and all kinds of spirals.

Friction fed multifunctional machine for creasing, perforation and punching. Input width 457 mm and input height 50 mm. Paper thickness for crasing and punching up to 400 g/m² and perforation up to 250 g/m².

Air fed multifunctional machine for creasing, perforation and punching. Input width 457 mm and input height 70 mm. Paper thickness for crasing and punching up to 400 g/m² and perforation up to 250 g/m².

The FM High Speed is (together with the double head version D2H High Speed) the fastest in the Pit Stop high speed range with its output of up to 14,000 sheets per hour and handling of paper weights from 80 up to 600gsm.

The D2H High Speed (essentially a FM High Speed with the addition of a second head) is at the top of Pit Stop high speed range. The second head is in parallel to the first head with the tool operating from the bottom rather than from the top. This enables creasing and perforating to be done in the same pass or, by fitting two creasing tools, creasing can be done from the top and bottom in the same pass ensuring correct crease direction for Z folding.

This automatic punching machine from Rilecart has been designed specifically for small and medium sizes.